Skip to main content

Publications

  1. Supramolecular Structure through Epitaxial Growth of Semiconducting Poly (3-hexylthiophene) on Carbon Nanotubes as Building Blocks for Nanoscale Electronics

    R.D.K. MISRA, D. DEPAN, V.S.A. CHALLA, J.S. SHAH

    JOURNAL OF PHYSICAL CHEMISTRY AND CHEMICAL PHYSICS , 16 (2014) pp. 19122-19129.

  2. The Development, Characterization, and Cellular Response of a Novel Electroactive Nanostructured Composite for Electrical Stimulation of Neural Cells

    D. DEPAN, R.D.K. MISRA

    BIOMATERIALS SCIENCE, 2 (2014) pp. 1727-1739.

  3. Significance of interplay between austenite stability and deformation mechanisms in governing three-stage work hardening behavior of phase-reversion induced nanograined/ultrafine-grained (NG/UFG) stainless steels with high strength-high ductility combination

    V.S.A. CHALLA, X.L. WAN, M.C. SOMANI, L.P. KARJALAINEN, and R.D.K. MISRA

    SCRIPTA MATERIALIA, 86 (2014) pp. 60-63.

  4. Structural and Physico-chemical Aspects of Silica Encapsulated ZnO Quantum Dots with High Quantum Yield and their Natural Uptake in HeLa Cells

    D. DEPAN and R.D.K. MISRA

    JOURNAL OF BIOMEDICAL RESEARCH A, 102 (2014) pp. 2934-2941.

  5. Hybrid Nanoscale Architecture of Wound Dressing with Superhydrophilic, Antimicrobial, and Ultralow-fouling Attributes

    D. DEPAN and R.D.K. MISRA

    JOURNAL OF BIOMEDICAL NANOTECHNOLOGY, 11 (2015) pp. 306-318.

  6. The Synergistic Effect of Hybrid Graphene Oxide-Chitosan System and Biomimetic Mineralization on Osteoblasts Functions

    D. DEPAN, T.C. PESACRETA, and R.D.K. MISRA

    BIOMATERIALS SCIENCE, 2 (2014) pp. 264-274.

  7. Understanding the Impact of Grain Structure in Austenitic Stainless Steel from Nano-Grained Regime to Coarse-Grained Regime on Osteoblast Functions using a Novel Metal Deformation-Annealing Sequence

    R.D.K. MISRA, C. NUNE, T.C. PESACRETA, M.C. SOMANI, L.P. KARJALAINEN

    ACTA BIOMATERIALIA, 9 (2014) pp. 6245-6258.

  8. Dependence of Cellular Activity at Protein Adsorbed Biointerfaces with Nano- to Microscale Dimensionality

    C. NUNE, R.D.K. MISRA, M.C. SOMANI, L.P. KARJALAINEN

    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH A, 102 (2014) pp. 1663-1676.

  9. On the Determining Role of Network Structure Titania in Silicone Against Bacterial Colonization: Mechanism and Disruption of Biofilm

    D. DEPAN and R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING C, 34 (2014) pp. 221-228.

  10. The Effect of Coiling Temperature on the Microstructure and Mechanical Properties of a Niobium-Titanium Microalloyed Steel Processed via Thin Slab Casting

    V.S.A. CHALLA, W.H. ZHOU, R.D.K. MISRA, R.O'MALLEY, and S.G. JANSTO

    MATERIALS SCIENCE AND ENGINEERING A, 595 (2014) pp. 143--153.

  11. Toward Interplay between Sub-structural Evolution, Dislocation Configuration and Yield Strengh in a Microalloyed Steel

    P.K.C. VENKATSURYA, R.D.K. MISRA, M. MULLOHAND, M. MANOHAR, and J.E. HARTMANN

    MATERIALS SCIENCE AND ENGINEERING A, 596 (2014) pp. 121-133.

  12. Constitutive Modeling and Dynamic Softening Mechanism During Hot Deformation of an Ultra-Pure 17% Cr Ferritic Stainless Steel Stabilized with Nb

    F. Gao, Z. Liu, R.D.K. Misra, H. Liu, and F. Yu

    METALS AND MATERIALS INTERNATIONAL, 20 (2014) pp. 939-951.

  13. Hot Deformation Behavior of Alloy 800H at Intermediate Temperatures: Constitutive Models and Microstructure Analysis

    Y.CAO, H.S. DI, R.D.K. MISRA, J. ZHANG

    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, in press (2014), DOI: 10.1007/s11665-014-1220-4.

  14. The Impact of Grain Structure of Austenitic Stainless Steel on Osteoblasts Differention and Mineralization

    C. NUNE, R.D.K. MISRA

    MATERIALS TECHNOLOGY, >in press (2014), DOI:10.1179/1753555714Y.0000000191.

  15. Microstructural Refinement and Mechanical Properties of High-speed Niobium-microalloyed Railway Wheel Steel

    S. WU, X. LI, J. ZHANG, C.J. SHANG, R.D.K. MISRA

    STEEL RESEARCH INTERNATIONAL, in press (2014).

  16. Effects of Carbon and Niobium on Microstructure and Properties for Ti-bearing Steels.

    F.Q. JI, C.N. LI, S. TANG, Z.Y. LIU, G.D. WANG

    MATERIALS SCIENCE AND TECHNOLOGY, in press (2014), DOI: 10.1179/ 1743284714Y.0000000647.

  17. Structure-property Relationship in a 960 MPa Grade Ultrahigh Strength Low Carbon Niobium-Vanadium Microalloyed Steel: The Significance of High Frequency Induction Tempering

    Z.J. XIE, C.J. SHANG, Y.P. Fang, G. Han, H. Guo, and R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING A, 618 (2014) pp. 112-117.

  18. Toward Interrelationship of Microstructural Evolution and Yield Strength Anisotropy in High-Strength Line Pipe Steels

    P.K.C. VENKATASURYA, R.D.K. MISRA, M.D. MULLHOLLAND, M. MANOHAR, J.E. HARTMAN

    AIST IRON AND STEEL TECHNOLOGY, October (2014) PR-PM1014-6.

  19. Interplay between Cellular Activity and Three-dimensional Scaffold-cell Constructs with Different Foam Structure Processed by Electron Beam Melting

    K.C. NUNE, R.D.K. MISRA, S.M. GAYTAN, L.E. MURR

    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH: PART A, in press (2014), DOI: 10.1002/jbm.a.35307.

  20. Biological Response of Next-generation of 3D Ti-6Al-4V Biomedical Devices Using Additive Manufacturing of Cellular and Functional Mesh Structures

    K.C. NUNE, R.D.K. MISRA, S.M. GAYTAN, L.E. MURR

    JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING, in press (2014).

  21. Influence of Prior Austenite Grain Size on Martensite-Austenite Constituent and Toughness in the Heat Affected Zone of 700 MPa High Strength Line Pipe Steel

    X. LI, M. SUBRAMANIAN, C.J. SHANG, R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING A, 616 (2014), pp. 141-147.

  22. The Effect of Tempering of Granular Bainite on Impact Toughness in a Thermo-Mechanically Processed High Strength and High Toughness Heavy Gauge Offshore Platform Steel – An Alternate to Quenching and Tempering Process

    W.H. ZHOU, R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING A, in press (2014).

  23. Microstructure and Dynamic Mechanical Properties of Fe-0.07C-23Mn-3.1Si-2.8Al-0.03Nb Steel

    Z.Y. TANG, M. MA, N. ZAN, Z.Q. WU, H. DING, R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING A, in press (2014).

  24. Mechanical Properties and Precipitation behavior of Ti-Mo Microalloyed Medium-Carbon Steel during the Austenite to Bainite Transformation

    X. DENG, Z. WANG, R.D.K. MISRA, J. HAN, G. WANG

    JOURNAL OF MATERIALS SCIENCE, in press (2014).

  25. Precipitation Behavior in a Nitride-strengthened Martensitic Heat Resistant Steel during Hot Deformation

    W. ZHANG, W. YAN, W. WANG, R.D.K. MISRA, Y. SHAN, K YANG

    MATERIALS SCIENCE AND ENGINEERING A, >in press (2014).

  26. Unique Impact of Ferrite in Influencing Austenite Stability and Deformation behavior in a Hot-rolled Fe-Mn-Al-C Steel

    Z.H. CAI, H. DING, R.D.K. MISRA, H. KONG, H.Y. WU

    MATERIALS SCIENCE AND ENGINEERING A, 595 (2014), pp. 86-91.

  27. Dynamic Recrystallization Behavior of AISI 420 Stainless Steel Under Hot Compression

    Y. CAO, H.S. DI, R.D.K. MISRA

    HIGH TEMPERATURE MATERIALS AND PROCESSES, in press (2014), DOI: 10.1515/htmp-2014-0026.

  28. Microstructural Evolution in TRIP-aided Seamless Steel Tube During T-shape Hydroforming Process J. LIU, Z. ZHANG, K. MANABE, Y. LI, R.D.K. MISRA

    MATERIALS CHARACTERIZATION, 94 (2014) pp. 149-160.

  29. Enhanced Stability of Retained Austenite And Consequent Work Hardening Rate through Pre-quenching prior to Quenching and Partitioning in a Q-P Microalloyed Steel

    J. ZHANG, H. DING, R.D.K. MISRA, C. WANG

    MATERIALS SCIENCE AND ENGINEERING A, 611 (2014) pp. 252-256.

  30. Microstructure and Mechanical Properties of a Novel 1000 MPa Grade TMCP Low Carbon Microalloyed Steel with Combination of High Strength and Excellent Toughness

    H. XIE, L.X. DU, J. HU, R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING A, 612 (2014) pp. 123-130.

  31. A Nanograined/Ultrafine-Grained Low-Carbon Microalloyed Steel Processed by Warm Rolling

    J. HU, L.X. DU, H. XIE, P. YU, R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING A, 605 (2014) pp. 186-191.

  32. Effect of Microstructural Constituents on Strength-Toughness Combination in a Low Carbon Bainitic Steel

    H.F. LAN, L.X. DU, R.D.K. MISRA

    MATERIALS SCIENCE AND ENGINEERING A, 611 (2014) pp. 194-200.

  33. The Impact of Aging Pre-treatment on the Hot Deformation Behavior of Alloy 800H at 750 ºC

    Y. CAO, H.S. DI, R.D.K. MISRA

    JOURNAL OF NUCLEAR MATERIALS, 452 (2014) pp. 77-86.

  34. Structure-Mechanical Property Relationship in a High Strength Microalloyed Steel with Low Yield Ratio: The Effect of Tempering Temperature

    M.W. TONG, P.K.C. VENKATASURYA, W.H. ZHOU, R.D.K. MISRA, B. GUO, K.G. ZHANG, W. FAN

    MATERIALS SCIENCE AND ENGINEERING A, 609 (2014) pp. 209-216.

  35. Microstructural and Texture Development during Multi-Pass Hot Deformation of a Stabilized High-Chromium Ferritic Stainless Steel

    S. MEHTONEN, E. PALMIERE, R.D.K. MISRA, P. KARJALAINEN, D. PORTER

    ISIJ INTERNATIONAL, 54 (2014) pp. 1406-1415.

  36. Microstructures of rare 142 nickel-based superalloy fabricated by electron beam melting

    L.E. Murr, E. Martinez, X.M. Pan, S.M. Gaytan, J.A. Castro, C.A. Terrazas, F. Medina, R.B. Wicker, D.H. Abbott

    Acta Materialia, 61 (2013) pp. 4289-4296.

  37. Some comments on orthopedic implants infection: Biomaterials issues

    L.E. Murr

    Journal of Biotechnology and Biomaterials, 3 (2013) p. 2.

  38. Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials

    A.R.T. Perez, D.A. Roberson, R.B. Wicker

    Journal of Failure Analysis and Prevention, doi: 10.1007/s11668-014-9803-9 (2014).

  39. 3D Printer selection: A decision making evaluation and ranking model

    D.A. Roberson, D. Espalin, R.B. Wicker

    Virtual and Physical Prototyping, 8 (2013) pp. 201-212.

  40. Microstructure and thermal oxidation behavior of yttria-stabilized hafnia nanostructured coatings deposited on alumina

    E.J. Rubio, G. Martinez, M. Noor-A-Alam, S.W. Stafford, V. Shutthanandan, C.V. Ramana

    Surface and Coating Technology, 236 (2013) pp. 142-148.

  41. A comparison of static and cyclic long term oxidation of two Nb-Cr-Mo-Si-B alloys

    K.S. Thomas, S.K. Varma

    Metallurgical and Materials Transactions A, 45A (2014) pp. 1124-1135.

  42. Statistical manufacturing model of printing technology

    N.S. Kim, S. Luna, J.H. Lee, T.E. Jeong

    Journal of Electronic Packaging, 135 (2013) pp. 01101-1-5.

  43. The synergistic effect of hybrid grapheme oxide-chitosan system and biomimetic mineralization on osteoblasts functions

    D. Depan, T.C. Pesacreta, R.D.K. Misra

    Biomaterials Science, 2 (2014) pp. 264-274.

  44. Pre-adsorption of protein on electrochemically grooved nanostructured stainless steel implant and relationship to cellular activity

    C. Nune, R.D.K. Misra

    Journal of Biomedical Nanotechology, 10 (2014) pp. 1320-1335.

  45. The interplay between nanostructured carbon-grafted chitosan scaffolds and protein adsorption on cellular response of osteoblasts: Structure-functional property relationship

    D. Depan, and R.D.K. Misra

    Acta Biomaterialia, 9 (2013) pp. 6084-6094.

Connect With Us

The University of Texas at El Paso
Center for Structural and Functional Materials Research and Innovation
Engineering Building, Room M-201
500 W University
El Paso, Texas 79968

E: dmisra2@utep.edu
P: (915) 747-8679
F: (915) 747-8036